Faceithard is supported by readers. When you buy with our links, we may earn a commission. Learn more

Tineco Floor One S6 VS S7 Pro

When it comes to wet-dry vacuums, Tineco manufacturer consistently keeps blazing with their design and cutting-edge features.

Here, we are into two best-in-class Tineco Floor One models comparison – S6 and S7 Pro.

Between these models, one gives you more battery life and cleaning options. Before diving into detail, look at all the differences with a quick summary below:

Tineco Floor One S6Tineco Floor One S7 Pro
Tineco Floor One S6 Model Tineco Floor One S7 Pro Model
Weight: 9.92 PoundsWeight: 11.31 Pounds
Clean Water Tank Capacity: 800mlClean Water Tank Capacity: 850ml
Display: LEDDisplay: 3.6 inch LCD
Head-lit Brush: NoHead-lit Brush: Yes
Self-Propelling: Yes (Only Forward)Self-Propelling: Yes (Forward & Backward)
Run Time: Max 35 MinutesRun Time: Max 40 Minutes
Ultra Cleaning Mode (Electrolyzed Water Cleaning): NoUltra Cleaning Mode (Electrolyzed Water Cleaning): Yes
Centrifugal Air Drying: StandardCentrifugal Air Drying: Enhanced
Bottomline: Comparing the S7 Pro and the S6, the S7 Pro outshines the S6 in almost every vital aspect – electrolyzed water cleaning, better run time, front headlight, and bi-directional self-propelling design.
Check on AmazonCheck on Amazon

Tineco Floor One S6 Pros & Drawbacks

  • The MHCBS tech armed in S6 ensures even water flow onto the brush roller.
  • Self-clean with centrifugal air drying.
  • HEPA Filtration.
  • Tineco S6 is easy to carry and operate, weighing only 4.5 Kilograms.
  • The S6 Pro wheel system’s design helps with only forward traction.
  • There is no inner mechanism in Tineco S6 to convert normal water to electrolyzed water.

Tineco Floor One S7 Pro Pros & Drawbacks

  • The wheel system in S7 Pro is self-propelling- helps you drive and steer the vacuum forward and back with minimum effort.
  • S7 Pro has a capacious 0.85 L clean water tank.
  • S7 Pro has the feature to cleanse the floor with electrolyzed water – this kills germs, bacteria, and viruses.
  • HEPA Filtration & Dual-Side Edge Cleaning.
  • The front-faced LED brush light is not able to make the microparticles visible.
  • Floor One models are not designed for use on carpets.

Full Comparison Table

Product / SpecificationTineco S6Tineco S7 Pro
Weight9.92 lbs11.31 lbs
Clean Water Tank800ml850ml
Dirt Water Tank720ml720ml
Screen DisplayLEDLCD
Ergonomic HandleYesYes
Brush Front HeadlightNoYes
Battery LifeUp To 35 minsUp To 40 mins
iLoop SensorYesYes
Cleaning ModesAuto, Max, SuctionAuto, Max, Suction, Ultra
Centrifugal Air DryingYesYes (Enhanced)
Electrolyzed CleaningNoYes
Edge CleaningDual-SideDual-Side
MHCBS TechnologyYesYes
Tineco AppYesYes
Voice PromptsYesYes
PriceCheck PriceCheck Price

The Design

The Tineco S6 is 9.92 pounds, while the S7 Pro comes barely heftier at 11.31 pounds.

One of the direct reasons for the weight of the S7 Pro is its bigger clean water tank capacity. The S7 Pro has an 850ml clean water tank, while the S6 features a smaller 800ml tank. Both models share the same dirt water tank capacity of 720ml.

The way Tineco Floor One S6 and S7 look may appear alike at first glimpse, but there are considerable differences. 

In the S6, there is an LED display with display icons – these icons blink respective of that function. 

On the other hand, the S7 Pro features a large 3.6-inch LCD screen. This LCD upgrades the user experience by showing all cleaner functions in an animated and highly graphical manner – a visually engaging option.

In terms of ease of use, these wet-dry cleaners feature ergonomic handles developed with easy-to-click buttons. And the magnetic brush rollers are readily separable and re-attachable.

The Floor One S7 Pro takes a step forward in user-focussed design with a headlight on the roller. It helps to make dark and shadowed areas seeable, like under furniture, so you won’t miss out on the dirt when cleaning.

Examples: Beneath Sofas, Underneath Cabinets, Closet Corners, Bedroom Shadows, Office Desks, Car Interiors.

While the S7 Pro’s headlight improves visibility when moving the cleaner in dark areas, it couldn’t match Dyson’s Detect vacuums feature that illuminates green light, making even the tiniest dirt particles visual during the cleaning process.

Another feature that enhances the Floor One S7 Pro’s maneuverability – it’s the Bi-Directional Self-Propelled Design.

Self-Propelled Design

The S7 and S6, both are self-propelling. But there is a considerable difference.

Before letting you know that, let’s uncover how this self-propulsion helps.

When driving a standard vacuum cleaner, you put some noticeable pressure on it. Right? Yes. 

But with these tineco models, much less effort is required. To move the Tineco S6 and S7, push on the handle slightly. The wheels understand and automatically propel in that direction – requiring very slight pressure compared to most market vacuums.

Now, speaking of the crucial difference – In the S6, the wheels assist when you move the vacuum forward, but in the S7 Pro, in both directions, either forward or backward, the S7 surpasses the S6 in ease of cleaning.

Suction Power & Battery Life

The Tineco Floor One S6 and S7 deliver similar cleaning force – the brush rollers in the vacuums rotate at 450 revolutions per minute (RPM) speed – not so impressive compared to non-mopping vacuum cleaners but termed “high” in the peer of wet-dry cleaners.

In auto, suction, and ultra modes, tineco’s are silent in action. And in max, you can observe a rise in sound level.

Working in default mode, with a full 100% charge, the S6 works up to 35 minutes, whereas the S7 Pro works up to 40 minutes.

For a single-family home with approximately 2500 sq. ft area and more than that, the Tineco S7 Pro operates for a longer time without draining up. For the houses with sq. ft less than 2400 sq. ft, this run time difference doesn’t count.

iLoop Smart Sensor & Cleaning Modes

All the Floor One S-series models we have reviewed in the last two years feature iLoop technology sensors located at the front of the cleaners, unlike the iFloor variants

These sensors detect dirt load and automatically alter suction power as required. It makes everything top-notch in terms of effectiveness and efficiency.

But sometimes, out of the box, we all look for suction and water flow control in our hands based on the type of dirt we come across. Floor One S6 and S7 Pro help in that – both offer valuable cleaning modes. 

The S7 Pro, in particular, excels with four cleaning modes, while the S6 has three.

First, let’s uncover three cleaning modes that are common in both wet-dry cleaners:

  1. Auto Mode: In this default cleaning mode, the vacuum automatically adjusts the suction and water flow volume based on the sensor input, as discussed earlier. 
  2. Max Mode: This mode is helpful if you want to set the suction to the highest level and clean.
  3. Suction Mode: You don’t want the cleaner to wet mop in a particular area? This mode is ideal.

Now, the mode exclusive to the S7 Pro is Ultra mode.

Ultra Mode: The Floor One S7 Pro is designed to convert the clean water inside into electrolyzed water when it is in Ultra Mode. This Electrolyzed water is exceptional for cleaning, removes tough stains, eliminates bacteria, viruses, and allergens, and doesn’t leave any wet floor smells.

Do you need to use Tineco’s cleaning solution? 

Yes, with S6. Not required with S7 Pro.

These days, it is concerning about the chemical-based items everywhere in our lives. Even when we mop our floors with cleaning solutions recommended by manufacturers, these solutions often contain chemicals that impact our environment and health.

In Floor One S7 Pro, using the Ultra mode, we eliminate the need for cleaning solutions, replacing them with natural disinfectant electrolyzed water. Along with simplifying our cleaning routines, this reduces our dependence on unhealthy cleansing solutions.

The S7 Pro’s capacity to convert water into electrolyzed water also sets it ahead in self-cleaning. Here is an overview of why it is so:

Self-Cleaning + Centrifugal Air Drying – S7 Pro Outperforms

Tineco wet-dry cleaners S6 and S7 Pro have self-cleaning and centrifugal air-drying features.

When you press the self-clean button after the cleaning cycle, the internal vacuum tube, brush roller, and compartment are all washed out with clean water. After water flushing, the roller rotates fast to dry, called centrifugal air drying.

In Tineco S7, there are two additional things:

  1. Instead of normal water, you can set the vacuum to self-clean using the electrolyzed water.
  2. Parallel to the rotating brush roller, the wind is blown onto the roller.

Both of these enhance the self-clean process and results significantly.

Another crucial difference:- The Floor One S6 offers a single self-clean option called “quick clean,” which finishes the whole process in 2 minutes

On the other hand, the S7 Pro provides two options: “quick clean” and “super clean.” Quick clean, like in the S6, takes 2 minutes, while the super clean takes 6 minutes, uses more water, and offers a thorough self-cleaning.

Edge-Cleaning – Which is More Suitable?

Both the cleaners’ design supports dual-side edge cleaning.

In Tineco vacuums, we tend to get concerned about their edge cleaning abilities. Dual-edge cleaning, in particular, is something we often wish for in base to high-end cleaners.

However, Tineco takes a unique approach. In the S3 and S5 series, edge cleaning is somewhat different. There’s no edge cleaning in the S3 and only one side in the S5 series. Only top-end models offer dual-side edge cleaning.

The MHCBS tech

The MHCBS stands for Maintain Hygiene Cleaning Brush System – is a significant advancement, equipped in the Floor One S6 and S7 Pro models.

Here is how it functions:

  1. At the machine’s base, you would find 16 water spray holes fronted toward the brush roller, providing an evenly distributed water flow onto the roller to maintain uniform cleaning.
  2. And these models are with the floating scraper. It’s affixed to one side of the rubber roller. It constantly presses down on the roller, squeezing out the dirty water. This water then goes back into the dirt water tank. 

We call this ‘Premium’ because the floating scraper adjusts with the roller movement, pushing it to work more effectively than the fixed scrapers in base to mid-level Tineco models.

The Floor Surfaces

Please note that Tineco Floor One S-series are specifically developed for working on sealed floors. They’re not suitable for carpets because their framed suction power is to work at a balanced range for sealed floors. Also, using them on carpets can break the carpet fibers.

However, regarding hardwood and tile, it’s hard to find wet-dry cleaners that serve better than these Floor One models.

We find that on a few low-pile carpets, these models work okay. But it doesn’t mean you clean those directly based on our word. 

Test run on a small section of the carpet first and check the vacuum roller to see if there are any carpet fibers clung to it. After making sure, you can proceed to clean the whole carpet.

The Accessories

Tineco Floor One S6 and S7 models are with the same included accessories:

  • Extra Brush Roller
  • Cleaning Solution & Tool
  • Extra HEPA (Dry) Filter
  • Charging Base

The charging base with Tineco Floor One S6 and S7 series wet dry cleaners is convenient. Just put the charging base near a power outlet. When it’s time to recharge, place the vacuum on the dock, and it will start charging, just like a robot vacuum base.

But it would be more pleasing if the vacuum had its charge port. You could carry the vacuum cleaner everywhere without bothering about the base.

The App & Voice Alerts

These Tineco Floor One wet-dry cleaners have built-in voice alerts – that prompt all cleaning and device alerts. 

You can also check the vacuum’s status on your phone after installing the Tineco app and registering the device. Also, you can change settings like brush light (On/Off), cleaning modes, spray levels, suction, and more in the app.

Final Thoughts

When recommending products in our robot vacuum or vacuum cleaners comparisons, whatever the category is, we have a three-way method.

Here it is:

  1. Budget and Precise Requirements: If two vacuums are diverse in features and there’s a significant price gap, we suggest choosing based on the individual budget and precise necessities.
  2. Practical Advancements: If one vacuum has extended features that are not practically useful in everyday use, we suggest the alternative.
  3. Long-Term Value: If one vacuum seems a better asset in our research and testing and there is less price difference, we lean towards that option.

Here, Tineco Floor One S6 and S7 Pro models fall third. You’re already in two top-end Tineco wet-dry cleaners comparison. 

The S7 Pro stands out. Its advanced 3D display and user-friendly bi-directional self-traction elevate your cleaning experience. It offers healthier cleaning through the use of electrolyzed water and boasts extended battery life, ensuring more coverage in one go. 

About Lingeshakumar

lingeshakumar author bio picture

Hi! I’m Lingeshakumar, an engineer by day and a tech enthusiast by night. I’m all ears if you’re conversing about a smart door switch or a voice-controlled robot vacuum. Technology excites me so much that I ended up with Masters in Manufacturing Engineering and troubleshooting advanced production systems for a living. When the sun sets, I focus on my passion for writing about AI-based devices.

Read More

Recent Updates:

  • Sept 23, 2023: Formatted & Published By
    Sam Y
  • Sept 22, 2023: Reviewed & Written By

Leave a Comment