Faceithard is supported by readers. When you buy with our links, we may earn a commission. Learn more

Roborock S5 VS S6 MaxV – Comparison Guide

Roborock S5 VS S6 MaxV

Roborock S5 – One of the top-notch roborock models released in 2017 made its mark in the robot vacuum market because of the outstanding user experience.

And Roborock S6 MaxV – released this April 2020 became renowned in a short time because of the exceptional AI-based features and supreme suction power (2500 Pa).

NOW:

Which Roborock model is right for you? Is the Roborock S6 MaxV model better than S5? Unable to decide? We collected all the features of both the models and compared them, placing sidewise and compiled this article.

Starting with the comparison chart:

Roborock S5 VS Roborock S6 MaxV – Comparison Chart

 Roborock S5Roborock S6 MaxV
Suction Power2000 Pa2500 Pa
ColorsBlack, white, and RosegoldBlack
Height & Weight9.6 cm & 3.5 kg9.65 cm & 3.7 kg
LDS Navigation SystemYesYes + Stereo Camera
Battery Life (Run Time)150 mins180 mins
Battery Size5200 mAh5200 mAh
Auto rechargeYesYes
Recharge & ResumeYesYes
MoppingYesYes (advanced)
Water tank Capacities180 ml300 ml (approx)
Selective Room CleaningYesYes
Dustbin capacity480 ml460 ml
Different Cleaning modes and suction settings for each roomNoYes
MappingYesYes
Multiple maps savingYes (Up to 3 Maps)Yes (Up to 4 Maps)
Intelligent Objects RecognitionNoYes
Carpet Boost optionYesYes
Zone CleaningYesYes
No go zones / Virtual boundariesYesYes
HEPA filter (Washable)YesYes
Cleaning area coverage200 m2300 m2
Noise level (Decibels)68 dB (balanced mode)64 dB (balanced mode)
Cleaning ModesYesYes
App and Wifi functionalityYesYes
Voice CommandsYesYes
Release DateOct 2017April 2020
PriceCheck on AmazonCheck on Amazon

Roborock S6 MaxV VS S5 Differences and Similarities

The difference in Physical Properties (Dimensions)

Weight

Roborock S5 Max measures 3.5 kg on the weighing scale while its counterpart, Roborock S6 MaxV, is heavier by 200 grams at 3.7 kg. Given their weights, the robotic cleaners can be easily transported between rooms and different floors in your home.

Height

At 9.6 cm, Roborock S5 just manages to get under the living room sofa for comprehensive cleaning activity. On the other hand, Roborock S6 MaxV squeezes below low-clearance furniture with its 9.65 cm height. Neither of the robots gets stuck or bumps into the furniture when navigating below during the cleaning process.

Comparing their Suction Power

2000 Pa on Roborock S5

The superior suction of 2000 Pa on Roborock S5 is more than enough to get everything from spilled grains to steel bearings on the floor. Regardless of the floor type, Roborock S5 capably engulfs dirt and dust without compromise and ensures no residual trails are left. The powerful suction of the S5 comes from a high-static pressure fan that operates imitating a cyclone. The S5 dynamically removes all dirt on the floor and deeply lodged debris on the carpet.

2500 Pa on Roborock S6 MaxV

A proper name is given to the relentless 2500 Pa force for the Roborock S6 MaxV – the HyperForce Stormer. Forget about all types of dust and dirty carpets. With the S6 MaxV, your hard floors are left to shine and carpets cleaner than ever due to unyielding suction power from the robot. The energetic suction force takes in every speck of dust and ensures your floorings are as good as new.

LDS with SLAM for Roborock S5

Utilizing a Laser Distancing Sensor (LDS) system, the Roborock S5 relies on precise laser scans to follow a pre-calculated route while cleaning. Not only that, but the S5 also adopts the SLAM algorithm that plots a defined and methodological path after obtaining information from the ma. Based on the size and interior of your house, the S5 combines LDS and SLAM systems to compute the most efficient travel path while capably negotiating obstacles along the way.?

ReactiveAI for S6 MaxV

roborock s6 maxv stereo camera
? Roborock

Roborock S6 MaxV deploys accurate lasers scans and the innovative Stereo Camera for maximum navigation ability. The LDS module works as a rangefinder, whereas the Stereo Camera system develops imaging for mapping and path planning. Together, both these systems make up the ReactiveAI of Roborock S6 MaxV. The novel technique allows the S6 Max V to see even small objects in its path and negotiates them in real-time. Moreover, the cleaning customization of each room on every floor is possible with ReactiveAI.?

How long can they operate within a single charge?

Roborock S5 capably cleans your home for 150 minutes before it needs to recharge. In contrast, the S6 MaxV works for about 180 minutes on a single charge. Both Roborock’s cleaners are smart, and so they dock themselves automatically to pump up their juice to resume cleaning, in case they had been interrupted in the middle.

Rated Power Difference

At 58 Watts, Roborock S5 is capable of sweeping, mopping, and vacuuming your home within a single battery charge. The power output is enough to map your home and immediately start cleaning. Meanwhile, the power yield from Roborock S6 MaxV is 66 Watts, about 8 watts higher than its counterpart. To support operations like the HyperForce Stormer, the Stereo Camera, more power is required for Roborock S6 MaxV.

Battery Capacity Comparison

The batteries on Roborock S5 and Roborock S6 MaxV are rated 5,200 mAh. These large batteries are the reason the robotic cleaners are capable of performing multiple operations for hours. Given the same battery capacity, the rated power on Roborock S6 MaxV is about 8 Watts more than Roborock S5.

How big an area they can clean? (Area coverage)

Cleaning Area

Roborock S5 cleans an area of about 200 m2 within a single charge. The S6 MaxV, however, does much better because it cleans an area of 300 m2 or more, mainly due to its higher output power and more efficient cleaning pattern.

Crossing Barriers’ Ability

Barriers up to 20 mm are effortlessly crossed by both Roborock S5, and Roborock S6 MaxV. The innovative design and durable omnidirectional wheels on the robots help steer not-so-high obstacles like doorsteps and thick mats.

How well do they clean?

Both Roborock S5 and Roborock S6 MaxV feature zoned cleaning and assigning schedules based on rooms. The competent “Z” shape cleaning pattern allows comprehensive cleaning when both robot cleaners get about working.

Which one mops better?

Roborock S5 – Biomimetic Technology

The S5 uses a biomimetic bundle filter to dampen the mopping cloth when mopping mode is activated. Water is trickled to the fabric electronically after being filtered for impurities and ensures a smooth mopping activity takes place. Light to moderate stains are wiped off, and your floors are left sparkling once again.

Roborock S6 MaxV – Exceptional Mopping

Roborock S6 MaxV adopts superior sensing technology to mop the floors in your home. Integrated to the body of the S6 MaxV, a mopping bracket detection sensor recognizes the mopping cloth when attached or detached. It prevents unnecessary mopping or wetting of the rug. On top of that, the S6 MaxV’s huge water tank dispenses water enough to mop a moderately-sized home two times before refilling. Fancy cleaning certain rooms with more wetness? Just access the map and select the room you want to be cleaned by increasing or decreasing the mopping intensity.

Analysis of Dustbin & Water Tank Capacity

Dustbin

The dustbin in Roborock S5 stores 480 ml of pet hair, and dirt, whereas the Roborock S6 MaxV stores nearly 460 ml. Despite the dustbins being full to the brim, both robotic cleaners yield maximum pressure when cleaning to ensure your floor is shiny and carpets are spotless.

Water Tank

In Roborock S5, water for mopping is dispensed from a 180 ml tank that is integrated with the robot. Meanwhile, for the same purpose, Roborock S6 MaxV equips a bigger water tank at 300 ml. It means your house can be mopped more times without refilling the S6 MaxV’s reservoir.

Are their technologies similar?

LIDAR with SLAM vs AI Obstacle Recognition & ReactiveAI

Objects Identification Feature of Roborock S6 MaxV
Source: Roborock

Roborock S5 relies solely on a LIDAR module and SLAM algorithm to navigate and map conveniently. The dynamic systems produce an exact map of your home for the S5 to refer to and complete its cleaning schedules. Conversely, Roborock S6 MaxV also uses LDS technology. Still, it also incorporates the new Stereo Camera for obstacle identification and negotiation. Put these two, and you have in hand the ReactiveAI system of the S6 MaxV that is precise, efficient, and fast.

Multi-level & Real-Time Mapping

Roborock S5 is capable of mapping and storing up to 3 maps of your home. Where else, the S6 MaxV does one better by storing up to 4 maps. You can access the maps from the Roborock Home App for further scheduling and setting room-by-room cleaning tasks.

Customizable Room Water Volume & Suction Power

On Roborock S6 MaxV, there is an added feature where you can regulate the suction power and mopping wetness in each room. Now, the child’s playroom gets more cleaning power and mopping intensity to ensure a clean and hygienic floor.

How different are their sensors?

Roborock S5 has an array of 13 sensors, including gyroscopes, odometer, compass, infra-red sensors, and a cliff-sensing system. Not only that, but the S5 also has indicators for a full bin and low water level. The sensors on Roborock S6 MaxV are the same as the S5 but with an additional wall sensor. That brings to a total of 14 sensors on the S6 MaxV.

Who is loud? Who is quiet?

When operating on balanced more, the S5 measures 68 dB whereas, in the same mode, Roborock S6 MaxV registers only 64 dB. However, their difference is negligible when they are operating as you can hardly notice any sound due to ambient noise.

Filter Differences

Roborock S5 and Roborock S6 MaxV are equipped with a HEPA and an E11 filter, respectively. These filters capture dust particles and tiny dirt without compromise. Furthermore, the E11 filters in them are incredibly effective in trapping allergens as small as 0.3 microns, keeping your house pollutant-free.

Wall Sensor

When traveling near walls, the S6 MaxV detects it and cleans just as close without bumping on them. Roborock S5 does not include this sensor.

roborock s5 app

The One App to Control Them

You can easily launch the Roborock HOME App to control, supervise, and schedule cleaning tasks for Roborock S5 and Roborock S6 MaxV. Additional controls like customized mopping wetness and suction pressure are available from the app. You can view the conditions of the cleaning brushes and filters from the Roborock Home App.

Here are the Roborock S5 app tips for a better experience.?

What about Voice Control?

Google Assistant and Amazon Alexa can be used with Roborock S5 and Roborock S6 MaxV by connecting them through the Roborock App. For a complete hand-free experience, throw a few voice commands and watch how the robots respond.

Maintenance

These are the automatic devices that need significantly less supervision when cleaning and maintaining as well. In the matter of maintenance, Roborocks stands well. Not just looks, they are all designed for user convenience. Every part of the roborock model, like debris extractors, brushes, dirt bins, water tanks, is easy to remove, replace, and rearrange. And the starting two years for small to medium-sized homes, there is no story of replacement required as the filter, dirt bin, and mopping system are washable and reusable.

Their Extra Features

Solid Cleaning vs Floating Main Brush

The main brush on Roborock S5 is a solid cleaning one that scrubs dirt off the floor and removes dust deep within carpets. With anti-tangle properties, the main brush of the S5 agitates well on dust and dirt. Meanwhile, the floating main brush on the S6 MaxV is designed the same as the S5, but it is suspended to get to all dust. Even when running on various surfaces, the brush on the S6 MaxV adapts well and cleans faultlessly.

Side Brushes with Dynamic-Speed

Roborock S5 and Roborock S6 MaxV have durable side brushes made of rubber that sweeps dust effectively from wall edges into the robots’ suction path. You don’t need to care about replacing the side brushes as frequently because of their resistant rubber material.

Enable Carpet Pressurization

Carpet pressurization is a feature available in both Roborock S5 and Roborock S6 MaxV. Whenever a carpet is detected during vacuuming, both robots ramp their suction power for maximum cleaning. During mopping, the smart cleaners back off precisely when a rug is seen.

Electronic Water Tank

On the S5 and S6 MaxV, the built-in reservoir dispenses water evenly on the mopping cloth with utmost precision. You can easily set how much wetness is required when mopping the kitchen floor and living room.?

Spring-Loaded Mopping

Innovative design allows the mopping cloth to be in constant contact with the floor. Using spring-loaded mopping, the continuous pressure holds the mopping cloth down when the S5 and S6 MaxV are gliding around methodically in mopping mode.

Mop Panel with Drawer Design

Another exciting feature in Roborock S6 MaxV is the mop panel is crafted like a drawer, which eases installation and refilling chores. The S5, however, does not feature this.

Conclusion

For Pet hair, hardwoods, carpets cleaning

For pet hairs and carpets cleaning, the higher the suction, the better the performance is. Speaking of Roborock S6 MaxV suction power, it’s around 2500 Pa, 500 Pa more than the S5 model. But S5’s 2000 Pa suction is abundant for small to medium-sized regular homes. We recommend S6 MaxV only for households with heavy shedding pets and with more carpets. And for hardwood floors, Roborock S5 is a wise choice.?

For large homes

Roborock S6 MaxV covers square footage (approx. 3000 sq. ft) compared to the Roborock S5 model, which covers near to the 2100 Square footage. And to say the battery life of S6 MaxV is thirty minutes higher than the S5 model. So considering both these, S6 MaxV is a better choice for people with large houses.

And for multiple floors cleaning, there is no better than S6 MaxV.